IBM AS/400e Manual page 34

16. On your system unit, install one end of an SPCN cable into an available SPCN
17. Tighten the thumbscrews.
18. On unit 5066–002, connect the other end of the SPCN cable to the SPCN
19. Tighten the thumbscrews.
20. On unit 5066-002, connect another SPCN cable to the SPCN connector that is
21. Tighten the thumbscrews.
22. On unit 5066-001, connect the other end of the second SPCN cable to the
23. Tighten the thumbscrews.
24. On your 5066 connect a power cable to each power connector.
25. Go to "Chapter 4. Completing your installation" on page 23.
22
Setting Up Your 5065 or 5066 Expansion Unit V4R5
connector. The SPCN connector is labeled J15 or J16.
connector that is labeled J15.
labeled J16.
SPCN connector that is labeled J15.