Faults / Troubleshooting; Decommissioning / Disposal - Dimplex WI 65TU Installation And Operating Instruction

Water-to-water heat pump for indoor installation
Table of Contents

Advertisement

Available languages

Available languages

WI 65TU - WI 95TU

10 Faults / troubleshooting

This heat pump is a quality product and is designed for trouble-
free operation. In the event that a fault should occur, it will be in-
dicated on the heat pump manager display. In this case, consult
the "Faults and troubleshooting" page in the operating instruc-
tions of the heat pump manager.
If you cannot correct the fault yourself, please contact your after-
sales service technician.
ATTENTION!
Work on the heat pump must only be performed by authorised and
qualified after-sales service technicians!
ATTENTION!
Disconnect all electrical circuits from the power source prior to opening
the device.
www.gdts.one
11 Decommissioning /
disposal
Before removing the heat pump, disconnect it from the power
source and close all valves. The heat pump must be dismantled
by trained personnel.
All environmentally-relevant requirements regarding the recov-
ery, recycling and disposal of materials and components should
be observed in accordance with the applicable standards. Par-
ticular attention should be paid to the proper disposal of refriger-
ants and refrigerant oils.
452237.66.11 · FD 9908
English
EN-11

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wi 95tu

Table of Contents