Advertisement
2
Footrest
Wire
• Position the footrest wire so that the
soothing unit is upright.
• While flexing the base wires toward each
other, hook the footrest wire onto the ends of the base wires.
• Push the footrest wire down completely, below the colored dots on the
base wires.
• Make sure the small tabs on the left and right base wires are secure in
the base connector holes (see inset). If the small tabs are not secure in
the base connector holes, you have assembled the base incorrectly.
Disassemble all parts and refer back to Assembly Step 1.
ASSEMBLY
Colored
Base Wire
Dot
Soothing
Unit
6
Colored
Dot
Base Wire
Base
Connector
Back View
Base
Wire
Advertisement
