Thermos 461240504 Product Manual page 9

7
Remove the two screws and washers from the sideburner valve bracket.
Place sideburner valve under front of sideburner control panel so that
valve stem comes through large hole. Secure valve to panel using the
two screws and washers you removed from the valve bracket. Press
control knob onto valve stem.
8
Insert sideburner into shelf, placing end of burner over
sideburner valve. Valve should be in center hole of burner
tube. Make sure pin on bottom of burner is in center hole
in shelf bracket. Secure burner to bracket with two
#10-24x3/8" screws (DDD) 5mm
and 5mm flat washers (FFF) See illustration below for
correct burner-to-valve engagement
Pin
in hole
FFF
EEE
DDD
First, remove
screws and
washers from
bracket.
, lock washers (EEE)
.
.
Correct
burner-to-valve
engagement
Sideburner
valve
,
Valve should be
in center hole in
burner tube.
Sideburner
461240504 • 9