Fuel Tank Installation - Briggs & Stratton 950 Series Advance Product Service Information

FUEL TANK INSTALLATION

When installing the fuel tank, the mounting screw adjacent to the control bracket must be installed first. Then
the hex nuts are installed on the opposite side of the tank.
Make sure the tangs of the fuel hose clamp (S) are pointing up after connecting the hose. Verify that the tank
installation does not interfere with the free movement of the governor lever, link, and springs (T).
COMMON SPECIFICATIONS AND SERVICE PARTS
Common Specifications
Armature Air Gap
Oil Seal - Mag Side
Oil Seal - PTO Side
Bore x Stroke
Crankshaft End Play - Standard
Crankshaft End Play - Pump Applications
Displacement
Oil Capacity
Sparkplug Gap
Valve Clearance - Intake
Valve Clearance - Exhaust
Common Service Parts
Air Filter Element
Air Filter Pre-cleaner
Carburetor Overhaul Kit
Engine Gasket Set
High Altitude Jets
Sparkplug
Sparkplug Wrench
Spark Tester
S
T
SAE
.010-.014 in
Recessed .050-.070 in
Recessed .090-.110 in
2.756 in x 2.130 in
.003-.030 in
.002-.009 in
12.69 ci
18-20 oz.
.030 in
.004-.006 in
.006-.008 in
Part Number
590601
590602
591770
591565
593359
491055
590721
19368
Metric
.25-.35 mm
Recessed 1.27-1.78
mm
Recessed 2.28-2.79
mm
70.00 mm x 54.00 mm
.08-.76 mm
.05-.23 mm
208 cc
.54-.59 L
.76 mm
.10-.15 mm
.15-.20 mm
Page 11 of 13