Thermo Pride OD6FA072D48R Installation And Operation Manual page 68

COMBUSTION AND EFFICIENCY TESTING FOR THERMO PRIDE
OIL FIRED CENTRAL FURNACES.
Complete this form for each Thermo Pride furnace installed. Read instruction
manual carefully before making tests. Retain this form with furnace.
CUSTOMER NAME
ADDRESS
CITY, STATE
BURNER MODEL NO.
HEATING
SYSTEM
COMBUSTION CHAMBER
TYPE OF VENTING SYSTEM
MASONRY
CHIMNEY
METAL
CHIMNEY
W/INDUCER
FUEL LINE FILTER
COMBUSTION
TESTS
CO2 in stack pipe
(Operate burner
Draft Over-fire
at least 10
Draft in stack pipe
minutes before
Smoke number
starting tests.)
Gross stack temp.
Furnace room temp.
Net stack temp.
(Gross stack minus
furnace room temp.)
Efficiency
Nozzle size and spray
Oil pump pressure
Operation of Controls
Burner Safety Controls
Check for oil leaks
Tests taken by
Date
NOTES:
INSTALLER NAME & ADDRESS
BLAST TUBE LGTH. AIR SHUTTER OPENING
INS.
CONDITION MATERIAL
METAL SIDEWALL
CHIMNEY POWER VENTER
MASONRY CHIMNEY
W/METAL LINER
DRAFT CONTROL
INITIAL
SERVICE
INSTALLATION
65
% OF MAX. (EST)
FURNACE MODEL
MASONRY
CHIMNEY
W/INDUCER
FURNACE SERIAL NUMBER
SERVICE SERVICE