Thermador HMWB36FS User Manual page 48

INSTALLATION OPTIONS
Thermador Custom Hood Inserts within custom hood applications create a
seamless design with wall or island applications.
Thermador Professional Series Custom Hood Inserts may be installed above
a Thermador Professional Cooktop or Range to create a convenient cooking
center. Refer to the appropriate section for additional speci cations.
Hood installation height above a cooktop can vary. Professional Rangetops
and Ranges require that minimum distances be maintained from the cooking
surface to combustible materials (i.e. a wood covering around the insert). These
minimum distances range from 30" to 40" and can vary from product to product
and by manufacturer. Refer to the installation manual of the rangetop or range
prior to the design and installation of the custom hood insert.
These hoods are designed to be used for vertical discharge. A blower must be
purchased separately.
BLOWER OPTIONS
REMOTE
VTR630D – 600 CFM Use RFPLT600 in roof-mount applications
VTR1030D – 1000 CFM Use RFPLT1000 in roof-mount applications
VTR1330E – 1300 CFM Use RFPLT1000 in roof-mount applications
INLINE
VTI610D – 600 CFM
VTI1010D – 1000 CFM
INTEGRATED
VTI610D – 600 CFM Inline blower can be used for an integrated
solution
See page 145 for further details.
REMOTE (Mounted to roof or external wall)
VTR630D 600 CFM VTR1030D 1000 CFM
INLINE (Mounted between kitchen and external wall)
VTI610D 600 CFM VTI1010D 1000 CFM
VENTILATION
Installation Note: Professional Rangetops and Ranges require
that minimum distances be maintained from the cooking
surface to combustible materials (i.e. a wood covering around
the insert). These minimum distances range from 30" to 40"
and can vary from product to product and by manufacturer.
Refer to the installation manual of the rangetop or range prior
to the design and installation of the custom hood insert.
VTR1330E 1300 CFM
INTEGRAL (Mounted on hood)
VTI610D 600 CFM
1.800.735.4328 | THERMADOR.COM
CUSTOM INSERT (30"/36"/48")
Models: VCI230DS, VCI236DS, VCI248DS
REMOTE BLOWER ACCESSORIES
RFPLT600, RFPLT1000 – Roofplate Material
For use with Remote Blowers VTR630D, VTR1030D
and VTR1330E
Combinations
Roofplate Remote Blower
RFPLT600 VTR630D
RFPLT1000 VTR1030D, VTR1330E
Overall Dimensions
Model No. A B
RFPLT600 7 1 / " 8 1 / " 9
2 2
RFPLT1000 9 / " 12" 11
3
8
C Duct Size
1 / " 6"
4
/ " 10"
1
8
179