,4X IMPORTANT SAFETY INSTRUCTIONS READ AND SAVE THESE INSTRUCTIONS. This appliance conforms to the relevant safety Installation work and electrical wiring must be regulations. done by qualified person(s) in accordance with all applicable codes and standards, including fire- Repairs should only be carried out by qualified related construction.
PRIOR TO INSTALLATION Step 1' EXHAUST-AIR MODE Step 2: PREPARING THE WALL _.s_Exhaust air should neither be directed into a smoke or [] The wall must be flat and perpendicular. exhaust flue that iscurrently used for other purposes, not Ensure that the wall is capable of providing a firm hold into a shaft that is used for ventilating rooms in which for mounting screws and plugs.
INSTALLATION 1. Hold the fan on the wall. Note the direction of the air conduction. 2. Mark the 4 mounting boreholes. /'_ At least one screw must be installed through a stud. /'_ The wall plugs must be suitable for the brickwork. /'_ Air outlet downwards.
Page 5
6. Connect the fan to the extractor hood with an extension cable if required. Use the added connector. Use the wire diagramm for connecting. /'_ The additional cover on the plug must always be attached and closed for safety reasons. /'_ Not needed wires must be isolated, capped with wire nuts and stored in a safe position.