Rack Positions - Thermador PRO-HARMONY PRD30 Care And Use Manual

stops over the front of the rail guides. Slide the rack
into position.
Removing racks from oven: To remove racks or
•
reposition racks in the oven, pull the rack toward the
front of the oven. Lift up the front of the rack over the
safety stops and pull from the oven.
• Place oven racks in desired positions before turning on
the oven.
• When placing food on a rack, pull the rack out to the
stop position. The racks are designed to lock and not
tilt when pulled forward.
Important: When placing the gliding rack in the oven,
make sure the front supports on the rack guides rest in
the large slots at the front corners of the rack. This is
necessary to keep the rack locked into position while
fully inserted into the oven.
Always
remove
before
Self Clean
Figure 22: Gliding Oven Rack
Figure 23: Rack Installation Detail
Bake Rack Positions
• Rack level positions in the oven are numbered like an
elevator. Number one level is the lowest.

Rack Positions

One Rack Baking
• The Bake mode is best for baking on one rack with
rack level #3 used for most baked items. If the item is
tall, such as an angel food cake, rack level #2 may be
used. Pies are best baked on rack level #2 to make
certain the bottom of the crust is done without over
browning the top. When large pieces of meat or poultry
are roasted, such as a prime rib of beef or a turkey,
rack level #2 is the preferred rack.
Two Rack Baking
• Rack levels #2 and #4 or #5 may be used when baking
on two levels. Foods such as cookies and biscuits work
well using these two racks. Casserole dishes may also
be baked using these two levels.
Three Rack Baking
• If three-rack baking is desired, the Convection Bake
mode should be used.
5
4
3
2
1
Figure 24: Oven Rack Positions
English 21