IBM Power Systems 9009-41A Manual page 129

Figure 114. Releasing the cable management arm
b) Swing the cable management arm away from the system.
10. Slide each of the power supplies into the system until the latch locks each one in place.
11. Using your labels, reconnect the power cords (A) to the system unit.
Fasten the power cords (A) to the system using the hook-and-loop fasteners (B) as shown in Figure
115 on page 116.
Removing and replacing the system backplane in the 9009-41A, 9009-42A, or 9223-42H 115