IBM Power Systems 9009-41A Manual page 108
System backplane
Hide thumbs
Also See for Power Systems 9009-41A:
- Manual (194 pages) ,
- Site and hardware planning (164 pages) ,
- Instructions manual (32 pages)
Table of Contents
Advertisement
Figure 93. Replacing the front drives
13. Replace the RDX docking station, if present. Otherwise, continue with step "14" on page 96.
a) Align the internal RDX latch with the holes on the bottom of the internal RDX docking station.
b) Hold the internal RDX latch in place while sliding the internal RDX docking station into the system.
c) Slide the internal RDX docking station into the system until it locks into place as shown in the
following figure.
94 Power Systems: System backplane
Advertisement
Table of Contents
