Texas Instruments TM5000 Series User Manual page 58

Battery LEDs
How Many LEDs Lit? What Color?
1
1
2
3
4
Note: If the notebook is left on with no AC adapter
plugged in, the batteries may deplete to the point
where the LEDs will not turn on when the Battery
n
Status button is pressed or when the AC adapter is
plugged in. To restore the batteries, plug in the AC
adapter and press each Battery Status button until
the red LED comes on. Recharge the batteries
normally.
3-10
Low battery state. Press the Battery Status
button to view LEDs. Battery Status only
displays the LEDs for a short period, so you
may need to press the button again if the
LEDs go dark. As the battery discharges,
LEDs turn off one at a time from right to
left until the battery is almost depleted. At
that time, the last green LED turns off and
a red LED comes on.
Red
Green
Green
Green
Green
Percent Charged
0 to 10%
11 to 25%
26 to 50%
51 to 75%
76 to 100%