The Radio: Preset Tuning - Technics SC-DV290 Operating Instructions Manual

TUNING MODE
A
SET
B
SET
!
TUNING
"
SET
C
1
TUNER/
BAND
2
1 2 3
4 5 6 10/-/--
7 8 9 0
3
VOLUME
28
" !
,
SET
SUBTITLE SETUP
SLEEP POSITION MEMORY GROUP
1 2 3 DISC
5 6 10/-/--
4
2
8 9 0
7
PRO LOGIC CH SELECT SUPER SRND
TEST
TOP MENU MENU
SUPER
EQ
SOUND EQ
DIRECT PLAY LIST
NAVIGATOR ENTER
S. 3D AI EQ AV EFFECT
DISPLAY RETURN
VCR(EXT)/ TAPE/ TUNER/ 1
VDP(AUX) DECK 1/ 2 DVD BAND
CANCEL
/
PLAY MODE
DIGITAL
MIX 2CH
SLOW/SEARCH
S.WOOFER
AUDIO
SHIFT MUTING SKIP
3
VOLUME

The radio: preset tuning

There are two methods of presetting stations.
Automatic presetting: The stations the tuner can receive are preset.
Manual presetting:
There are 39 channels available for presetting.
ª
A Automatic presetting
Do the following once each for FM and AM.
Preparation: Tune to the frequency presetting is to begin at (
Hold down [SET].
Release the button when "AUTO MEMORY" appears on the tuner/amplifier.
The tuner presets all the stations it can receive into the channels in ascend-
ing order. FM stations are preset into channels 1 to 39, and AM stations are
preset into channels 21 to 39.
"SET OK" is shown when presetting is complete and the last station to be
preset is played.
"ERROR" is displayed if the tuner doesn't receive any stations. Do preset-
ting manually if this happens (see below).
Note
AM stations replace any FM channels that were preset in channels 21
to 39.
MHz
ª
B Manual presetting
Preset the stations one at a time.
1 Tune to the required station.
2 Press [SET].
3 Press [TUNING (X or W)] to select a channel.
4 Press [SET].
The station occupying a channel is erased if another station is preset in that
channel.
ª
C Selecting channels
Preparation: Press [Í] to turn the unit on.
On the remote control
1
Press [TUNER/BAND].
2
Press the numbered buttons to select the
channel.
For channels 1 to 9 press the corresponding number.
For channels 10 or over press [S10/-/--], then the two digits.
e.g. To select channel 21: [S10/-/--]>[2]>[1]
3
Adjust the volume.
On the main unit
1 Select "PRESET" with [TUNING MODE].
2 Press [TUNING (X or W)] to select the channel.
You can select the stations to preset and the order
they are preset in.
page 27).