Changing The Sound Range Display; Muting The Volume; Using Headphones (Not Included) - Technics SC-DV290 Operating Instructions Manual

A
DISPLAY MODE
DISPLAY MODE
a
b
c
B
CANCEL
PLAY MODE
DIGITAL
MIX 2CH
AUDIO S.WOOFER
SHIFT MUTING
MUTING
MUTING
C
PHONES
DVD
/
SLOW/SEARCH
SKIP
VOLUME
VOLUME

Changing the sound range display

A
The sound processor shows the level of each sound range with the three
types of display described below.
Press [DISPLAY MODE].
The spectrum display will change as follows.
[a] Normal display
This display indicates the strength of the sound in each tonal range.
[b] Peak-hold display
The peak sound value of each sound range is held on the display for
about one second after it occurs.
[c] Aurora display
The peak sound value of each sound range is displayed in inverted
form.

Muting the volume

B
Remote control only
Press [MUTING].
Volume is reduced to minimum.
To cancel
Press [MUTING] again.
"MUTING" goes out and the volume is restored.
To cancel from the tuner/amplifier, turn [VOLUME] to minimum (– – dB),
then raise it to the required level.
Muting is also canceled when the unit is turned off.

Using headphones (not included)

C
Reduce the volume before connection.
Avoid listening for prolonged periods of time to prevent hearing damage.
Plug type: 3.5 mm stereo
41