Using Gui Screens - Technics SC-DV290 Operating Instructions Manual

DISPLAY
A
Example [DVD-V]
2 2
24
SUBTITLE SETUP
SLEEP POSITION MEMORY GROUP
1 2 3 DISC
4 5 6 10/-/--
Numbered
7 8 9 0
buttons
PRO LOGIC CH SELECT SUPER SRND
TEST
TOP MENU MENU
SUPER
EQ
SOUND EQ , ,
DIRECT PLAY LIST
NAVIGATOR ENTER
ENTER
S. 3D AI EQ AV EFFECT
DISPLAY RETURN
RETURN
VCR(EXT)/ TAPE/ TUNER/
VDP(AUX) DECK 1/ 2 DVD
BAND
CANCEL
PLAY MODE /
MIX 2CH DIGITAL
SLOW/SEARCH
S.WOOFER
AUDIO
SHIFT MUTING SKIP
VOLUME
1 : 46 : 50

Using GUI screens

[RAM] [DVD-A] [DVD-V]
Remote control only
GUI screens are menus that contain information about the disc or unit.
These menus allow you to perform operations by changing this information.
Common procedures
1
Press [DISPLAY].
Each time you press the button:
,
Disc information (
:
Original display(-----------------------=Unit information (
2
[Unit\information\only]
While the leftmost icon is highlighted
Press [3, 4] to select the menu.
Each time you press the button:
Play menu()Display menu
:
;
Picture menu()Audio menu
3
Press [2, 1] to select the item.
4
Press [3, 4] to select the setting.
≥Items with "3" or "4" above and below can be changed by [3, 4].
≥Press [ENTER] if the setting does not change after pressing [3, 4].
≥Some items require different operations. Read the explanations on
the following pages.
For your reference
≥Depending on the condition of the unit (playing, stopped, etc.) and the
type of software you are playing, there are some items that you cannot
select or change.
≥When numbers are displayed (e.g. title No.), the numbered buttons are
also effective for setting. After entering the numbers, press [ENTER] to
register the setting.
To clear the menus
Press [RETURN] until the menus disappear.
∫ To change the position of the icons
Press [2, 1] to select the rightmost icon.
1
Press [3, 4] to move the icons.
2
(There are 5 positions.)
ª
A Progress indicator
Indicates how far you have played through an item.
1 Current position [RAM] [DVD-A] [DVD-V]
2 PG: Program number [RAM]
PL: Play list number [RAM]
Title number [DVD-V]
T:
Track number
Group number [DVD-A] [WMA] [MP3] [JPEG]
G:
Track number in group [DVD-A] [WMA] [MP3]
3 T:
Chapter number [DVD-V]
C:
Picture number [JPEG]
P:
4 Condition - play, pause, or slow/search
[RAM] [DVD-A] [DVD-V]
Play speed (
5 Changing the time display [RAM] [DVD-A] [DVD-V]
Press [3, 4] to show the elapsed play time or remaining time for the
program, play list, track or title.
Elapsed play time [WMA] [MP3]
(display only, cannot be changed)
Changing play speed
[DVD-A] (Motion picture parts only) [DVD-V] (Dolby Digital only)
You can slow down or speed up play.
During play
Press [2] (slower) or [1] (faster).
There are five speeds:
k0.8()k0.9()k1.0 (normal speed)()k1.2()k1.4
After you change the speed, output is in stereo.
Sound is stereo as long as "k1.0" is orange.
To return to normal play (surround sound), press [1] (play) or [ENTER].
Normal play is also restored when you return the speed to k1.0 and clear
the progress indicator.
[VCD] [CD] [WMA] [MP3] [JPEG]
page 25)_)Progress indicator (
;
:
;
[VCD] [CD] [WMA] [MP3]
[VCD] [CD]
[VCD] [CD] [WMA] [MP3]
below)
below)
page 26)
[VCD] [CD]