Making Turns - Linhai LH500ATV-D Owner's/Operator's Manual

OWNER'S/OPERATOR'S MANUAL
LH500ATV-D 14.0
12. RIDING

Making turns

Practice making turns at slow speeds
This ATV is equipped with a solid rear axle which drives both
rear wheels equally at all times. This means that the wheel on the outside of
the turn must travel a greater distance than the inside wheels when turning and
the inside tire must slip traction slightly. To turn, steer in the direction of the turn
leaning your upper body to the inside of the turn while supporting your weight
on the outer footrest. This technique alters the balance of traction between the
rear wheels allowing the turn to be made smoothly. The same leaning
technique should be used for turning in reverse
WARNING
Avoid turning at sharp angles in reverse as tip over and severe injury may
result.
12-2