Call Forwarding - THOMSON TG784 Setup And User Manual

Activating services on the web pages
To activate/deactivate supplementary services via the web page:
1 Browse to the Thomson Gateway Web
2 On the Toolbox menu, click Telephony.
3 In the Location bar, click Configure.
4 In the Pick a task list, click View Telephony Services.
5 In the Location bar, click Configure.
6 To activate/ deactivate supplementary services select/clear the check box of the supplementary service.
7 Click Apply.

Call Forwarding

Call Forwarding informs you about the call forwarding parameters:
CFNR-timer or Call Forwarding on No Reply timer is the time expressed in seconds after which an
incoming call is forwarded when not answered.
CFNR-destination or Call Forwarding on No Reply destination is the telephone number to which a call is
forwarded when the CFNR-timer expires.
CFU-destination or Call Forwarding Unconditional is the telephone number to which an incoming call is
always forwarded.
CFBS-destination or Call Forwarding on Busy Subscriber is the telephone number to which an incoming
call is forwarded when your telephone is busy.
Using switching order commands
In order to use switching order commands (R or hook flash followed by a digit), certain supplementary
services have to be activated.
The following list gives an overview of the supplementary services that have to be activated in order to use
switching order commands (SOC):
Hold
Activate when you want to
Action
To put an active call on hold and enable a
call set up (the dial tone is generated)
To terminate the call on hold
To terminate an active call and switch to
the call on hold
E-DOC-CTC-20080421-0010 v1.0
Interface.
Press Illustration
R, 2
B
active
R, 0
B
active
R, 1
B
active
5 Telephony
B
C
A presses
R2
on hold
A
B
C
A presses
R0
active
on hold
A
B
C
A presses
R1
on hold
A
C
dial tone
A
C
A
C
active
A
37