■ Procedure
1.
NOTE:
Be sure to put a piece of paper [2] and place the Control Panel Unit [1] on it carefully so as not to damage it.
2.
Removing the Duplex Frame Unit
■ Preparation
1.
"Removing the Cartridge" on page 77
2.
"Removing the Right Cover" on page 78
3.
" Removing the Left Cover" on page 80
4. Depending on the model, perform one of the following operation.
•
"Removing the DADF Unit + Reader Unit" on page 93
•
"Removing the SADF Unit + Reader Unit" on page 126
•
"Removing the Copyboard Cover + Reader Unit" on page 157
5.
" Removing the Toner Cover" on page 86
6.
" Removing the Upper Cover" on page 91
7.
"Removing the Duplex Door" on page 90
2x
212
4. Parts Replacement and Cleaning