Copier (Service Mode For Printer); Display (State Display Mode) - Canon imageCLASS MF269dw Service Manual

COPIER (Service mode for printer)

DISPLAY (State display mode)

COPIER (Service mode for printer) > DISPLAY (State display mode)
ERR
Detail
Adj/Set/Operate Method
JAM
Detail
Display/Adj/Set Range
■ VERSION
COPIER (Service mode for printer) > DISPLAY (State display mode) > VERSION
MAIN
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
BOOT
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
LANG
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
ECONT
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
■ CCD
COPIER (Service mode for printer) > DISPLAY (State display mode) > CCD
FB-TARGET-B
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Related Service Mode
Display error log
To display the error log (max. 20 items).
N/A (Display only)
Display jam log
To display the jam logs of the printer and ADF scanner (max. 20 items).
N/A (Display only)
Display Main Controller Version
To display the main controller version.
When upgrading the firmware.
N/A (Display only)
00.00 to 99.99
Display BOOT ROM version
To display the version of boot ROM.
When upgrading the firmware.
N/A (Display only)
00.00 to 99.99
Display Language pack version
To display the version of Language pack.
When upgrading the firmware.
N/A (Display only)
00.00 to 99.99
Display Engine Controller version
To display the version of the engine controller.
When upgrading the firmware.
N/A (Display only)
00.00 to 99.99
Display shading target value (B)
To display the shading target value of BLUE at copyboard reading.
At scanned image failure
N/A (Display only)
128 to 384
COPIER > ADJUST > CCD > FBTAR-B
246
8. Service Mode