Certification; Approvals; Csa - Siemens RUGGEDCOM RX1400 Installation Manual

Certification

The RUGGEDCOM RX1400 device has been thoroughly tested to guarantee its confor-
mance with recognized standards and has received approval from recognized regula-
tory agencies.
6.1

Approvals

This section details the standards to which the RUGGEDCOM RX1400 complies.
6.1.1

CSA

This device meets the requirements of the following Canadian Standards Association
(CSA) standards under certificate 16.70029035:
•
•
•
•
•
•
•
•
RUGGEDCOM RX1400
Installation Manual, 09/2019, C79000-G8976-1103-13
CAN/CSA-C22.2 No. 142-M1987
Process Control Equipment
CAN/CSA-C22.2 No. 213-M1987
Non-Incendive Electrical Equipment for Use in Class I, Division 2 Hazardous Loca-
tions
CAN/CSA-C22.2 No. 60079-0:11
Explosive Atmospheres – Part 0: Equipment – General Requirements
CAN/CSA-C22.2 No. 60079-15:12
Electrical Apparatus for Explosive Gas Atmospheres – Part 15: Construction, Test
and Marking of Type of Protection N Electrical Apparatus
UL 916, Edition 4.0 (2007)
Standard for Energy Management Equipment
UL 60079-0, Edition 6.0 (2013)
Explosive Atmospheres – Part 0: Equipment – General Requirements
UL 60079-15, Edition 4.0 (2013)
Explosive Atmospheres – Part 15: Equipment Protection by Type of Protection N
ANSI/ISA-12.12.01-2013
Non-Incendive Electrical Equipment for Use in Class I and II, Division 2 and Class
III, Division 1 and 2 Hazardous (Classified) Locations
6
43