Table of Contents
Advertisement
Automatic installation
The Automatic installation function is useful if you have to go through the installation procedure again, such as
when moving house. This function deletes all previously memorised programmes. To install a new channel, you
should use the Manual programming function.
Before running
AUTO
INSTALLATION, check the
displayed is correct.
Your television will only search for channels corresponding to the selected country, so see the Manual
programming chapter to install any channels not found. For cable networks, if you have not found certain
channels, select
installation again.
1. Press and hold the
control to display the
INSTALLATION MAIN
MENU
(The
SUMMARY
followed by the
INSTALLATION MAIN
MENU).
2. Select the
Auto installation
3. Validate using
.
A message will inform you that Automatic
installation has begun.
Wait for a few minutes.
A new message will inform you when
Automatic installation is completed.
If you wish to check or reorganize your channel
display, press the
Programme organisation chapter.
If you do not wish to reorganize your
programmes, you can exit this menu by
pressing
, then watch the programme of
your choice. Choose the desired programme
using the number keys (1, 2, 3, ...) and the
/
keys.
Automatic installation
instead of a country name in the
Other
key on the remote
appears first,
line.
key and see the
PERSONAL SETTINGS
PERSONAL SETTINGS
INSTALLATION MAIN MENU
Exit
Manual programming
Auto installation
Programme organisation
Personal settings
SEARCHING
AUTO INSTALLATION
003 STATIONS FOUND
Searching for TV stations.
Please wait. To cancel press EXIT.
menu to ensure that the country
menu, then run automatic
7
Advertisement
Table of Contents
