Related Manuals for Telefunken S590NIC
Summary of Contents for Telefunken S590NIC
- Page 1 ’ • ’ • • S 590 NIC •...
- Page 2 _ _ _ << > >> ZOOM SP/LP >> A - Z Z - A ZOOM -/-- SP/LP A - Z Z - A -/-- 2 x LR06 (AA) - 1,5 V...
-
Page 3: Safety Precautions
• Never use abrasive cleaners. • To clean the front and the cabinet of your equipment use a soft cloth dipped in mild detergent. The use of strong solvents such as white spirits or alcohol based products could damage your equipment. -
Page 4: Table Of Contents
- Select the programmes (from 1 to 99) - Enter the channels numbers OTHER FUNCTIONS - EXTRAS 15/18 - The 0 key is used to call AV inputs 1, 2 and 3. Clock - Child lock - Lock -/-- CONNECTIONS... - Page 5 L AUDIO R VIDEO INSTALL Programme Selection Press briefly to restart automatic Volume adjustments channel setting to reinstall in the event a change and horizontal cursor in transmitter or in a new area installation. movement in menus. CONNECTIONS (OUT L)
- Page 6 This set is equiped with an automatic station search system which is used for : • Searching for all the stations received in your region and storing them in memory • Automatically searching for the name of the station •...
- Page 7 Zap to check that the stations found are correctly numbered and named as you want than: • IF YES press briefly: the menu disappears and is replaced by the picture of the programme selected. PR+, PR- Select the station • IF NO you make changes as follows +, -, 0..9...
- Page 8 • Limit the maximum volume. • Limiter le volume sonore maximum. • Change the menu language (German, Spanish, French, English, Italian, Swedish, Dutch), • Modifier la langue des menus (allemand, espagnol, français, anglais, italien, suédois). • Permanently display the number of the programme being viewed, •...
- Page 9 Teletext, you can Language F D E I S NL Programme Display opt to select any one of the 4 channels - BBC1, BBC2, ITV, CH4. Time reference PR 01 Select the corresponding programme number.
-
Page 10: Picture Adjustments
Brightness Colour PICTURE is selected. Contrast Sharpness Digital Mastering If this is not the case, select the Contents line using the Light Sensor green key and Picture with the key. T E L E F U N K E N Select the Brightness line (green key). -
Page 11: Sound Adjustments
AUTO/STEREO position enables you obtain MONO sound for mono broadcasts and STEREO for stereo broadcasts. * NICAM is a digital sound transmission system, it enables you to receive broadcasts in high quality STEREO or DUAL SOUND, Analogue MONO sound is transmitted simultaneously (MONO in NICAM STEREO or SOUND 3 in NICAM 3). - Page 12 T E L E F U N K E N HEADPHONES is selected. Headphones If this is not the case, select the Contents line with the red button and HEADPHONES with T E L E F U N K E N Select the Headphones line (red key).
-
Page 13: Day To Day Operation
PR 02 BBC 2 If the standby light is on, select the programme required by the remote control or the PR–/+ buttons on the front of the set. For the programmes 1 to 9: Press the corresponding number briefly. - Page 14 Zoom freeze Last LAST PROGRAMME VIEWED SP/LP programme viewed This function is used to switch rapidly between 2 programmes. Press the key. The previously viewed programme is selected. SP/LP ZOOM -/-- ZOOM Press repeatedly: on + to enlarge the picture, on –...
-
Page 15: Other Functions - Extras
The TV will turn off when the programmed time has elapsed. >> Remove the menu from the screen. The set will switched to standby at the end of the timer interval. You can display the time left before the stop time. Press briefly the TV key >>... - Page 16 -when the set is switched to standby and a sleep timer command is programmed; -when the set is turn off at the mains and a sleep timer command is programmed; -after switching off the TV set by holding down the standby button on the remote control for more than 3 seconds.
- Page 17 Press the volume (+) key briefly. Access the programme list (+) The new code is stored in the memory and the menu displays: T E L E F U N K E N When you enter a code for the first time, the figures replace Change your PIN number the dashes;...
- Page 18 If they are selected using the remote control number buttons, the following message is displayed on the screen: Incorrect PIN number If you do not enter the right code, the message Incorrect PIN To access this programme number will appear above the first one.
-
Page 19: Connections
If you have two VCRs connected, the decoder must be connected to the VCR connected to the Euro-AV1 socket. If you have a satellite receiver, refer to the operating manual in order to find out the type of signal delivered then select VIDEO, S-VIDEO or RGB. - Page 20 Continue to press: the letters are shown in reverse order. When the required character appears, go to next character. To leave a space look for the blank character (between ? and A). CALLING UP AUDIOVISUAL PROGRAMMES Press AV to call AV1, AV2 or AV3 programmes in sequence.
- Page 21 COPYING VIDEO TAPES It is necessary to have 2 VCRs with the same specifications: 2 VHS/8 mm or 2 S-VHS/Hi-8 mm. Connect the playback VCR to the Euro-AV1 socket in playback mode. Connect the recording VCR to the Euro-AV2 socket in recording mode.
- Page 22 WEATHER..300 (3 figures automatically). NEWS FLASHES: SPORT 104 FINANCE Example: page 170, enter 1, 7, 0 (the number is displayed at the ON SKYSPORTS: SPORT, FOOTBALL, RACING top left of the screen). HENNESSY GOLD CUP BREAK SkyOne p 365 GUIDE...
-
Page 23: Teletext
<< >> TOPTEXT Select subpages with red or green keys. FASTEXT FAVORITE Allows you to store up to 6 of your favourite teletext pages. To store your favourite pages, select one of the 6 locations by GUIDE FAVORITE DISPLAY SUBCODE... - Page 24 NEWS FLASH The latest news can be superimposed on the television picture. Look up the teletext index to find the page number and enter it. Once the page has been found, you can watch the normal television programme. When the latest news page is updated, it will be superimposed on the picture.
- Page 25 You may use this channel adjustment menu if you do not wish to restart auto programming (where there are only few channels in your area or if a new channel is transmitting). PROGRAMME PROGRAMME TUNING The following menu is displayed:...
- Page 26 Briefly press 5 to display the tens t th Briefly press 2 to display the units Optional : To be used if the picture is not clear or for searching for a specific source, for example, a video recorder channel Fine Tuning Cable CC -- Select Fine Tuning line (yellow key).
- Page 27 After changing code, it is not necessary to relock the programs which were already locked. Nous vous recommandons de découper cette vignette pour qu’un enfant ne puisse pas en prendre connaissance. SI VOUS NE VOUS SOUVENEZ PLUS DE VOTRE CODE PERSONNEL Appuyez sur la touche jaune pour sélectionner la ligne Sommaire du menu,...