Maximum ambient temperature: 35°C Maximum humidity: 85% By the end of your TV evening or when away from home for a longer period, we recommend that you turn off the TV set with the On/Off-switch. Even when the On/Off-switch is in the Off-position, your TV set is not fully disconnected from the mains. To disconnect the set completely, the mains plug must be pulled out.
Contents Using the remote control How to call up a menu and how to select a and fitting the batteries. function, a setting or an option. Page 4 Page Daily viewing ..... . .
Basic connections The mains plug (1) supplies power to the television. The Continental television must only be plugged in to a 220-240 V - 50 Hz Europe power supply. It must never be plugged in to a DC source. If the plug comes away from the lead, never attempt to plug it in: this could cause electrocution.
Teletext. control to enter first the tens digit then the units digit. Please respect the environment! Before throwing any batteries away, consult your distributor who may be able to take them back for specific recycling.
Navigation principles Navigation principles Calling up the Installation main menu INSTALLATION MAIN MENU If there is no menu displayed on the screen, press and hold the key on the remote Exit control. The settings SUMMARY is displayed Manual programming first, followed by the INSTALLATION MAIN...
Installing your television for the first time Installing your television for the first time First plug the television into a mains power outlet and to the external aerial or a cable network, then switch on using the ON/OFF switch located on the front or the side of your set.
Automatic installation Automatic installation The Automatic installation function is useful if you have to go through the installation procedure again, such as when moving house. This function deletes all previously memorised programmes. To install a new channel, you should use the Manual programming function.
Decoder Use the Left/Right keys to tick the box if the channel is coded and if a decoder is connected to the AV1 jack. External sound path Switch on your decoder. If the sound is coded or if you have no sound, activate or deactivate the box as required using the Left/Right keys.
Menu language Select the language in which the menus are to PERSONAL SETTINGS be displayed. Return Country Indicate the country in which you are if you wish Menu language English to rerun Automatic Programming. Country For cable networks, if certain channels...
AV2 video input Use the Left/Right keys to select the type of video signal received at the AV2 SCART socket (Video or S-Video). AV3 video input Use the Left/Right keys to select the type of video signal received at the AV3 sockets (these sockets are located on the front or the side of the television).
Bass Virtual Surround sound channels using two loudspeakers. Select each of these lines and adjust to suit you. “”Dolby”, “”Pro Logic” and the double -D symbol are trademarks of the Surround effect Dolby Laboratories Licensing Corporation. Manufactured under licence from Dolby Laboratories Licensing This line appears only if you have selected Corporation.
(0 to 9) on your remote control. Wake-up timer If you wish to be woken up by your television on the channel of your choice, you must first set the television clock to the correct time (see above).
To display the previous page, press the Left key. If you wish to watch one of the programmes on the page displayed: Enter the last digit of the programme number (e.g. for 25 simply enter 5) on the remote control. The list disappears and your programme is selected.
The television can now only be operated from the remote control. To release the lock, press any number key on the remote control. Switching Off the Television To switch off the television, press the Standby key on the remote control or press the ON/OFF switch on the television set.
Select ZOOM using the Up/Down keys then press the key once to magnify the top of the screen, twice to magnify the bottom of the screen (the page will scroll from top to bottom) and a third time to return to the normal display.
SCART Socket Appliance SCART Socket Peripheral Camcorder Camcorder Cinches or S-Video Camcorder Connecting a HiFi or AV amplifier If you wish to connect a HiFi or AV amplifier, plug it into the peripheral jack AV2 using a SCART-CINCH type lead.
Page 20
THOMSON multimedia 46/47 Quai A. Le Gallo 92648 Boulogne Cedex France RCS Nanterre B 322019464 06 - 98 - 253 534 70...