Daily Viewing; Picture Adjustment; Sound Settings - Telefunken DF321C User Manual

Daily viewing

Picture Adjustment

Display the SUMMARY
the remote control. Select Picture. Validate
using . The PICTURE
Select and set the proposed options. Use
the information below to help you.
Brightness, Colour, Contrast, Sharpness:
Select each of these lines one after the other and
set as required.
Contrast expand :
Select this line then choose the desired Contrast
expand setting (High or Low).
Tone :
Select this line then choose the desired colour
tone (Warm, Neutral or Cold).
Exit the menu using

Sound Settings

Display the SUMMARY
the remote control. Select the line marked
Sound Validate using
.
is displayed.
Select and set the proposed options. Use
the information below to help you.
Sound type :
The choices available to you depend on
your television model and the broadcast.
Stereo, Dual or NICAM reception and the
corresponding choices are only available
on Stereo or NICAM Stereo televisions.
Select this line, then select the type of sound you
desire.
Sound mode :
Select this line, then choose the desired mode
using the Left/Right keys.
The choices available to you depend on
your television model and the type of
sound. Magic and
are only available in stereo on TV's
equipped with Virtual Dolby Surround.
Stereo wide is only available on Stereo or
Nicam televisions not equipped with
Virtual Dolby Surround.
Balance L/R :
Select this line, then balance the sound between
the Left and Right loudspeakers.
Treble, Bass :
Select each of these lines and adjust to suit you.
Surround effect :
This line appears only if you have selected
Dolby Virtual on the
Select this line and adjust the surround effect to
suit you.
Exit the menu using
12
Daily viewing
using the key on
menu is displayed.
.
using the key on
. The SOUND menu
Dolby Virtual modes
Sound mode line.
.
Return
Brightness
Colour
Contrast
Sharpness
Contrast expand
Tone
Select the line marked Return
menu.
Return
Sound type
Sound mode
Balance L/R
Treble
Bass
Surround effect
Broadcast
mono
stereo
dual
NICAM-3
AV
Mode
Normal
: reproduces the original sound (
mono or stereo).
Wide
: gives a stereo effect on mono sounds.
Stereo wide : accentuates the stereo effect.
Magic : accentuates the stereo effects and
adds echo.
Dolby Virtual : Virtual Dolby Surround.
Virtual Surround Dolby is based on Dolby Pro Logic
decoding for the reproduction of the Left, Right, Centre and
Virtual Surround sound channels using two loudspeakers.
""Dolby", ""Pro Logic" and the double -D symbol are trademarks of the
Dolby Laboratories Licensing Corporation.
Manufactured under licence from Dolby Laboratories Licensing
Corporation.
PICTURE
Neutral
Cold
to return to the previous
SOUND
Automatic
Normal
Choice
automatic - mono
mono - stereo
sound 1 - sound 2
sound 1 - sound 2 - sound 3
stereo - sound 1 - sound 2
Effect