Connecting The Power Cables; Installing The Power Cord Retention Bracket - Fortinet FortiManager-1000C Rack And Hardware Install Manual

Rack Installation Instructions

Connecting the Power Cables

Installing the Power Cord Retention Bracket

FortiManager-1000C™ Version 4.0 Rack and Hardware Install Guide
02-40000-112634-20091026
http://docs.fortinet.com/ • Feedback
Figure 17: Connecting the power cables.
Connect the system's power cable(s) to the system and, if a monitor is used, connect the
monitor's power cable to the monitor.
Figure 18: Installing the power cord retention bracket
Attach the power cord retention bracket on the right bend of the power supply handle.
Bend the system power cable into a loop as shown in the illustration and attach to the
bracket's cable clasp.
Plug the other end of the power cable(s) into a grounded electrical outlet or a separate
power source such as an uninterrupted power supply (UPS) or a power distribution unit
(PDU).
Connecting the Power Cables
21