Description Of Each Mode - Boss AW-3 Dynamic Wah Owner's Manual

Description of Each Mode

7 UP, DOWN, SHARP
UP Mode: Provides a wah effect in which the filter shifts to
higher frequencies.
DOWN Mode: Provides a wah effect in which the filter shifts to
lower frequencies.
SHARP Mode: Provides a stronger wah effect with shifting of the
filter to higher frequencies.
4
8
3 2
1. When you have finished making the connections (p.
6), turn the effect on (the CHECK indicator turns
red).
2. Use the SENS knob to adjust the amount of effect
that is applied in response to the input level.
3. With the MANUAL knob, adjust the frequency at
which the wah effect begins.
4. With the DECAY knob, adjust the length of time the
wah effect is applied.
MEMO
If an expression pedal made by Roland/BOSS is connected to
the EXP/CTL jack, this unit operates as a pedal wah, and the
SENS/MANUAL/DECAY knobs do not function.
* Refer to "Using the EXP/CTL Jack" (p. 12).