Checking Out Sounds - Play Mode - Boss ME-30 Owner's Manual

If There is No Sound/Low Sound Output
¢ is all your other equipment properly connected?
Check all connections once more.
* Is the volume turned down?
Check the volume setting of the amp or mixer you have connected.
Can you hear the sound through headphones when they are
plugged in? if so, it may be that there is a short in one of the cables
connecting the amp or other equipment, or your external devices
could be set incorrectly.
# {s the expression pedal positioned so that the sound is lowered?
When the expression pedal is functioning as a volume pedal
("VOLUME" appears in the pedal area of the display), no sound is
produced when the pedal tip is raised.
Has the unit been switched into Tuner mode? (page 25)
Output is muted in Tuner mode.
18
Checking Out Sounds
— Play Mode
The ME-30 goes into Play mode when the power is turned on.
This is the mode in which you can use the pedals to call up
patches one after another when performing.
Switching Patches
To switch patches, use a number pedal (1-3) and the bank up
and bank down pedals.
Switching Numbers
When you press Number pedal (1), the number indicator (2)
above the pedal lights up, and the patch stored in the memory
location corresponding to that number is instantly called up,
switching you to that patch's sound.
However, here you can only select from three types of sound.
With the ME-30's "Bank pedals," though, you can select from
an even greater number of sounds.