Next steps
1. Connect the
battery
cable.
2. Replace the
base cover
3. Replace the
SIM card tray
4. Replace the
microSD
card.
5. Follow the procedure in
WWAN card
Removing the WWAN card
Prerequisites
1. Follow the procedure in
2. Remove the
microSD
card.
3. Remove the
SIM card tray
4. Remove the
base cover
5. Disconnect the
battery cable
Steps
1. Loosen the single (M2x3) captive screw that secures the WWAN card bracket to the system board [1].
2. Remove the WWAN card bracket with screw that secures the WWAN antenna cables [2].
3. Disconnect the WWAN antenna cables from the connectors on the WWAN card [3].
4. Slide and lift the WWAN card away from the connector on the system board [4].
26
Removing and installing components
after working inside your
computer.
before working inside your
computer.