Dell Latitude 5300 Service Manual page 68
2-in-1 chrome
Hide thumbs
Also See for Latitude 5300:
- Service manual (123 pages) ,
- Setup and specifications (49 pages) ,
- Setup and speci?cations manual (44 pages)
Table of Contents
Advertisement
Steps
1. Peel the adhesive tape and disconnect the EMR sensor cable from the connector on the system board [1].
2. Peel the adhesive tape and disconnect the touch screen cable from the connector on the system board [2].
3. Remove the single (M2x4) screw that secures the eDP cable bracket to the system board [3].
4. Lift the eDP cable bracket from the system board [4].
5. Disconnect the eDP cable from the system board [5].
6. Open the display assembly to a 180-degree angle and flip over the system, and then place the system on a flat surface.
68
Removing and installing components
- Quick Links:
- Sim Card Tray
- Wwan Card
Hide quick links:
Advertisement
Table of Contents
