Dell Latitude 5300 Service Manual page 58

2-in-1 chrome
Hide thumbs Also See for Latitude 5300:
Table of Contents

Advertisement

3. Peel the adhesive tape and disconnect the EMR sensor cable from the connector on the system board [1].
4. Peel the adhesive tape and disconnect the touch screen cable from the connector on the system board [2].
5. Remove the single (M2x4) screw that secures the eDP cable bracket to the system board [3].
6. Lift the eDP cable bracket from the system board [4].
7. Disconnect the eDP cable from the system board [5].
58
Removing and installing components

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents