Connecting Computers (5.1 Sound Cards) - Teac PowerMax-HP10 User Manual

2. Connecting Computers (5.1 Sound Cards)

Utilize an USB cable to connect power to the system. The USB 5V
power source is connected to the back of the 5.1 amplifier box
(USB1). The second USB connector USB2 is intended to replace
the occupied USB connector of your computer for other USB
devices. In case of audible interference noise (e.g. with note-
books) disconnect the USB cable and install the external power
supply.
PC 5.1 sound cards and the 3.5mm mini phono stereo input
jacks of the headphone amplifier are connected together with
the PC cable.
Optionally a 5.1 amplifier/speaker system can be connected to
the pass-through 5.1 output connectors of the headphone am-
plifier. It provides the DVD signal for further playback devices.
MP3 devices can be connected to AUX with the PC connecting
cable.
For power and signal connection method, please refer to the
following picture.
34 | PowerMax-HP10