To ensure the smooth handling of your warranty please write the serial number of your device into the box. In the case of warranty you are expected to send it together with a copy of your invoice to your nearest TEAC sales representative.
EMC Directive 89/336/EEC LVD Directive 73/23/EEC EN 55022/1998 EN 60000-3-2/-3-3 EN 55024/1998 EN 60000-4-2/-4-3/-4-4/-4-5/-4-6/-4-8/-4-11 CONTENT OF PACKAGE PowerMax-HP10 existing of 5.1 channel amplifier 6 channel 5.1 headphone In-line controller Power adapter PC connecting cable...
Also avoid placing on top of heat radiating objects. By strong electromagnetic fields (e.g. wireless phones) noisy sound may be caused. As long as the distortions may last we recommend to reduce the volume of the unit with the "master volume knob". 27 | PowerMax-HP10...
11. Front level control knob 12. Rear level control knob 13. Center level control knob 14. Vibration (subwoofer 5.1 channel) level control knob 28 | PowerMax-HP10 Back Plate 6. AUX (Stereo) Audio Input DVD (5.1 channel) Audio Input 8. Audio Extension Output DC Power Source (7.5 V...
PC signal connecting cable with 3.5mm stereo plugs on both ends. AMP connection cable with 3.5mm stereo plugs & RCA jacks. DVD connection cable with RCA jacks and 3.5mm stereo phono plugs. TV connection cable with 3.5mm stereo phono plug & RCA plugs. USB extension cable. 29 | PowerMax-HP10...
AUX. At the same time the indicator lights asso- ciated with the channels L, R, and Sub are tumed on. Adjust volume to the desired position according to environment and preferences. Front, Rear, Center, Sub/Vibration selections on the 30 | PowerMax-HP10...
Page 9
Sound environment and vibration effects are the same as on 5.1 source playback. Important: Please follow the instructions given by the labels on the device which are shown below. 31 | PowerMax-HP10...
CONNECTING THE POWERMAX-HP10 Caution! Before connecting the system, switch off the power of the PowerMax-HP10 and other equipments power sources. 1. Connecting DVD players An external DC power supply is required. Connect a 7.5V DC power supply to the 7.5V DC input jack on the back of the 5.1 amplifier box.
5.1 output connectors of the headphone am- plifier. It provides the DVD signal for further playback devices. MP3 devices can be connected to AUX with the PC connecting cable. For power and signal connection method, please refer to the following picture. 34 | PowerMax-HP10...
CD devices can be connected to the input AUX with the PC connecting cable. For power and signal connection method, please refer to the picture below. PC connecting cable (A) 7.5V DC Back plate Power Supply PowerMax-HP10 36 | PowerMax-HP10...
It provides the AUX signal for further play- back devices. For power and signal connection method, please refer to the picture below. VCD output connencting cable (D) Stereo amplifier connencting cable 7.5V DC Power adapter Back plate PowerMax-HP10 37 | PowerMax-HP10...
Optionally a stereo amplifier/speaker system can be connected to the pass-through 5.1 front output connectors of the head- phone amplifier. For power and signal connection method, please refer to the picture below. stereo sound card USB cable (E) stereo speaker Back plate PowerMax-HP10 38 | PowerMax-HP10...
5.1 front output connectors of the headphone amplifier. It provides the AUX signal for further playback devices. For power and signal connection method, please refer to the picture below. stereo sound card USB cable (E) 5.1 channel Back plate speaker PowerMax-HP10 39 | PowerMax-HP10...
Speaker Driver Vibration SPECIFICATION MICROPHONE Type Electret-Capsule Weight Directivity Impedance Sensitivity Frequency Range Operation Voltage nominal 40 | PowerMax-HP10 1 Set 1 Set 1 Set 20Hz-20kHz 20Hz-120Hz >=80dB >-60dB <0.5% 230/7.5V, 500mA, 3.75W 5.0V, 500mA, 2.5W 90 x 155 x 143 mm approx.
TEAC dealers and/or their author- ized service stations may decide wether the defective product will be repaired or replaced as a whole or partially. The TEAC dependancies, the authorized TEAC service stations, the author- ized TEAC dealers and/or their authorized service stations will also honour this warranty in the other EC and EFTA member states based on the terms in this warranty conditions.
Page 20
Any damage arising of transportation and any implicit and explicit risks are the liability of the freight company.This is expressivly not a liability of TEAC; (d) repair or attempted repair by anyone not authorized by TEAC to repair this product;...
Page 21
TEAC products. Furthermore TEAC is not liable for damages arising out of loss of use, loss of revenue or profits, or any other damages, wether incidential, consequential, or otherwise.
Page 22
TEAC Europe GmbH, DSPD: Bahnstraße 12, 65205 Wiesbaden-Erbenheim, Germany Internet: www.teac.de TEAC Service Center: TEAC Service Centre Europe Hessenring 25 64546 Mörfelden-Walldorf, Germany www.teac.de/rma 44 | PowerMax-HP10...