Table of Contents
Advertisement
Setup Radio
Call up the menu Setup Radio by pressing the selector key
function key
. Press on the function key
Radio
tion key
memory list
to determine from which list in the radio mode the
stations are to be selected with the arrow keys. If the
selected, only stored stations from the memory list are called up.
"Memory" is displayed at the top left in the main menu RADIO.
Select station keys for display
– Press on the function key behind the function key
menu Setup°Radio.
– In the pop-up window, press and select the station keys to be
displayed in the main menu RADIO.
Switching the RDS function on or off (RDS regional)
– Press on the function key
RDS regional
opening pop-up window.
– Press on the function key
Automatic
frequency for the radio station heard, which offers the best reception
at the present time.
– When pressing on the function key
radio station emitting regionally long enough until the reception
quality is so bad, that there is a risk of a program loss.
Delete memory list
– In the menu Setup Radio move the sliding regulator to the bottom to
display the function key
Delete memory list
– Press the function key
Erase memory list
safety interrogation in order to erase all radio stations stored in the
memory list.
and the
SETUP
or on the func-
station list
is
Memory list
in the
Station keys
and select a set-up in the
, doing so will always choose the
Fix
, the unit attempts to hold a
.
and confirm the following
Preferred TMC station
If the "preferred" TMC station can no longer be received, the system automatically
searches for the TMC station offering the best reception for the currently driven
area. You can determine in the Setup Radio from which TMC station the reports are
to be announced.
Traffic station set-ups
Call up the TIM Setup recording time menu by pressing the range selector
key
SETUP
and the function key
– Press on the left of the display on TIM recording time, in order to open
the Time setting menu.
– In the Time setting menu, briefly press on the arrow keys
the display, below the display of the hours or minutes, in order to
gradually change the respective time unit down or up.
– Keep pressing the corresponding arrow key, in order to continuously
change the time unit. Release the button if the desired value has been
reached.
– Press on the function key
recording time and to exit the menu Time setting.
– In this way you can set both desired TIM recording times.
– Activate or deactivate the desired TIM recording time by pressing the
function key
Active
. If the check-box is active
TIM recording time is activated.
The unit starts with the recording 90 minutes before the set start time and ends the
recording 30 minutes afterwards.
Basic setting
Traffic information
.
or
in order to take over the indicated TIM
the accompanying
15
on
Hide quick links:
Advertisement
Table of Contents
