Use As An Upright Vacuum Cleaner For Cleaning Overhead - Dirt Devil DUSTY 360 DD1400 Operating Manual

3 Vacuum cleaning

3.4 Use as an upright vacuum cleaner for cleaning overhead

7
8
30
CAUTION:
Use only intact nozzles. Only use the dia-
mond shaped nozzle with its micro-fibre
sleeve attached for sensitive surfaces.
1. Fit the telescopic tube by inserting it into
the vacuum cleaner opening so that you
hear it click into place (fig. 7).
2. Set the length of the telescopic tube as
necessary by actuating the locking mech-
anism (fig. 1/11) and pulling on the tube at
the same time.
3. Now fit an attachment of your choice:
- The diamond shaped nozzle with its mi-
cro-fibre sleeve attached (fig. 7) adapts
perfectly to the contours of all objects
and thus cleans thoroughly and gently.
- The crevice nozzle (fig. 8) is ideal for
cracks in sofas and car seats.
4. We recommend interposing the articulat-
ed joint (fig. 7 + 8).
5. You can set the position of the articulated
joint using the buttons (fig. 1/6).
NOTE:
Always maintain good posture when work-
ing. Select the telescopic tube length and
working height so that you can work in as
natural a position as possible.
6. Once you have fitted the components, you
can connect the appliance and switch it on
at the On/Off button (fig. 2/17, position "I").
7. Make sure that you switch off the appli-
ance before you remove or fit accessories.
NOTE:
The turbo brush can only be fitted directly
to the appliance, i.e. not to the telescopic
tube or articulated joint.