Temperature Trend; Reset System; Safety And Care; Warnings - Oregon Scientific RAR186 Owner's Manual

the selected sensor. To clear both the indoor
thermometer and selected sensor records, press and
hold MEM for 2 seconds.
A beep will sound to confirm that the memory has been
cleared.

TEMPERATURE TREND

The trend line is shown next to the Temperature reading.
Trend Rising
ICON

RESET SYSTEM

The RESET buttons are located in the battery
compartments for the main unit and sensors. Press
RESET when you change the batteries and whenever
performance is not behaving as expected (for example,
unable to establish radio frequency link with remote
sensor.
When you press RESET, all settings will return
to default value, and you will lose all stored information.
NOTE

SAFETY AND CARE

Clean the product with a slightly damp cloth and alcohol-
All manuals and user guides at all-guides.com
Steady Falling
free mild detergent. Avoid dropping the product or placing
it in a high-traffic location.

WARNINGS

This product is designed to give you years of service if
handled properly. Observe the following guidelines:
• Never immerse the product in water. This can
cause electrical shock and damage the product.
• Do not subject the main unit to extreme force,
shock, or fluctuations in temperature or humidity.
• Do not tamper with the internal components.
• Do not mix new and old batteries or batteries of
different types.
• Do not use rechargeable batteries with this
product.
• Remove the batteries if storing this product for a
long period of time.
• Do not scratch the LCD display.
Do not make any changes or modifications to this
product. Unauthorized changes may void your right to
product and contents of this user guide are subject to
use the product. The technical specification of this
change without notice. Images not drawn to scale.

TROUBLESHOOTING

10