The unit is in searching mode.
Transmission data are securely
registered.
No signals.
THE COMFORT-LEVEL ICONS
The comfort level is based on the recorded relative humidity. An
indicator will be displayed ot show if the level is comfortable, wet or
dry.
Comfort-level
TEMPERATURE AND HUMIDITY TREND
INDICATORS
The temperature-trend and humidity-trend indicators show the trends
of collected readings. Arrows indicate a rising, steady or falling
trend.
EMR899_EN_R3
indicator
Temperature
indicator
Humidity
Note: If the temperature goes above or below the temperature
measuring range of the main unit or the remote unit ( stated in
specification), the display will show "HHH" or "LLL".
The unit can be set to automatically scan and display readings from
the remote sensors. When the remote-sensor mode is active, the
display will show the readings from one channel for about 4-second
and then proceed to the next channel display.
To activate the remote-sensor scanning mode:
• Press and hold CHANNEL for 2-seconds.
6
6
Arrow
Rising
Trend
Arrow
Rising
Trend
REMOTE SENSOR SCANNING
8/30/04, 11:36 AM
Steady
Falling
Steady
Falling