Connections; Connector X1 - Siemens SIMOVERT SLP Operating Instructions Manual

SIMOLINK Pulse Generator
5

Connections

5.1

Connector X1

Siemens AG GWE-477 764 4070.76 J
SIMOVERT MASTERDRIVES
02.2001
The SIMOLINK Pulse Generator module has the following connectors
♦ X1 for power supply,
♦ X2 for signal output and
♦ a SIMOLINK fiber-optic cable connection with one transmit socket
and one receive socket.
The 6-pin connector is on top of the housing. The 24 V power supply to
the SIMOLINK Pulse Generator is connected via X1.
M
+24 V
Socket X1
Fig. 5-1
Terminal Designation
1 -
2 -
3 -
4 -
5 M
6 +24V
Connectable cross-section: 1.5 mm
Terminal 1 is the terminal to the rear of the module top plate (see plan view).
Table 5-1 Connector assignments
Operating Instructions
Connector
Meaning
Unused
Unused
Unused
Unused
Ground
24 V power supply
2
(AWG 16)
Connections
Range
+21 ... 28 V
5-1