Stihl FS 410 C K Instruction Manual page 36

English
The following maintenance intervals apply in normal operating conditions. The spec-
ified intervals must be shortened accordingly when working for longer than normal
or under difficult cutting conditions (extensive dust, etc.).
Combustion chamber
All accessible screws, nuts and bolts (not
2)
adjusting screws)
Antivibration elements
Cutting attachment
Metal cutting attachment
Safety information sticker
1)
Only if there is a noticeable loss of engine power
2)
by a servicing dealer, STIHL recommends STIHL servicing dealers
3)
Tighten screws for the muffler after a running time of 10 to 20 hours after first use
4)
See the section "Inspection and maintenance by the servicing dealer", subsection "Antivibration elements"
34
decarbonize after 139 hours of opera-
tion, subsequently after every 150 hours
of operation
retighten
4)
check
2)
replace
visual inspection
replace
check for secure fit
sharpen
replace
X
X X
X X
X
X
X
X
X
X
X
X
FS 410 C K