Attachment, Deflector, Limit Stop And Harness - Stihl FS 410 C K Instruction Manual

Approved Combinations of Cutting Attachment, Deflector, Limit Stop and Harness
Cutting attachment
1
3 4
Permissible combinations
Choose the proper combination from the
table depending on the cutting
attachment!
For safety reasons only the cutting
attachments and deflectors and/or limit
stops within one line of the table may be
combined with one another. Other
combinations are not permissible – risk
of accident!
Cutting attachments
Metal cutting attachments
1 Circular saw blade 200 scratcher
tooth
2 Circular saw blade 200 chisel tooth
FS 410 C K
2
5
3 Circular saw blade 225 scratcher
tooth
4 Circular saw blade 225 chisel tooth
5 Circular saw blade 225 (carbide-
tipped)
Circular saw blades of other, non-metal
materials must not be used.
Deflectors / limit stops
6 Limit stop for circular saw blades
200
7 Limit stop for circular saw blades
225
Harnesses
8 Full harness must be used
Deflector / limit stop
6
7
English
Harness
8
9