Stihl FS 410 C K Instruction Manual page 18

English
Cliplock filler cap (bayonet-type)
Opening screw-type tank cap
Turn the cap counterclockwise until
N
it can be removed from the tank
opening.
Remove the cap.
N
Filling up with fuel
Take care not to spill fuel while fueling
and do not overfill the tank.
STIHL recommends you use the STIHL
filler nozzle for fuel (special accessory).
Filling up with fuel
N
16
Closing screw-type tank cap
Place the cap in the opening.
N
Turn the cap clockwise as far as
N
stop and tighten it down as firmly as
possible by hand.
Opening tank cap with hinged grip
Swing the grip to the upright
N
position.
Rotate the cap about 1/4 turn
N
counterclockwise.
Remove the cap.
N
Filling up with fuel
Take care not to spill fuel while fueling
and do not overfill the tank.
STIHL recommends you use the STIHL
filler nozzle for fuel (special accessory).
Filling up with fuel
N
Closing tank cap with hinged grip
Grip must be vertical:
Fit the cap in the opening – the
N
marks on the cap and filler neck
must line up.
Press the cap down as far as stop.
N
FS 410 C K