Kia CERATO 2018 Owner's Manual page 57

Securing a child restraint seat with
tether anchor system (if equipped)
This symbol indicates the po‐
sition of the tether anchor.
* : if equipped
Child restraint hook holders are located
on the package tray.
1. Route the child restraint system
top tether over the seatback.
For vehicles with adjustable head‐
rest, route the top tether under
the headrest and between the
headrest posts, otherwise route
the top tether over the top of the
seatback. In case of interference
between the child restraint system
and the headrest remove the par‐
ticular head restraint for better fit‐
ment of the child restraint system.
2. Connect and tighten the top tether
to the corresponding child restraint
system to secure the child restraint
system.
WARNING
A child can be seriously injured or kil‐
led in a collision if the child restraint
is not properly anchored to the car
and the child is not properly re‐
strained in the child restraint. Al‐
ways follow the child seat manufac‐
turer's instructions for installation
and use.
WARNING
n Tether strap
Never mount more than one child re‐
straint to a single tether or to a sin‐
gle lower anchorage point. The in‐
creased load caused by multiple
seats may cause the tethers or an‐
chorage points to break, causing se‐
rious injury or death.
3
3-37