Kia CERATO 2018 Owner's Manual page 169

Press brake pedal to start engine (for
smart key system and automatic
transaxle / dual clutch transmission)
• This warning message illuminates if
the Engine Start/Stop
changes to the ACC position twice by
pressing the button repeatedly with‐
out depressing the brake pedal.
• It means that you should depress the
brake pedal to start the engine.
Press clutch pedal to start engine (for
smart key system and manual trans‐
axle)
• This warning message illuminates if
the Engine Start/Stop
changes to the ACC position twice by
pressing the button repeatedly with‐
out depressing the clutch pedal.
• It means that you should depress the
clutch pedal to start the engine.
Key not in vehicle (for smart key sys‐
tem)
• This warning message illuminates if
the smart key is not in the vehicle
when you press the Engine Start/
Stop Button.
• It means that you should always have
the smart key with you.
Key not detected (for smart key sys‐
tem)
Button
• This warning message illuminates if
the smart key is not detected when
you press the Engine Start/Stop But‐
ton.
Press START button again (for smart
key system)
• This warning message illuminates if
you can not operate the Engine
Start/Stop Button when there is a
problem with the Engine Start/Stop
Button
Button system.
• It means that you could start the en‐
gine by pressing the Engine Start/
Stop Button once more.
• If the warning illuminates each time
you press the Engine Start/Stop But‐
ton, have the vehicle inspected by a
professional workshop. Kia recom‐
mends to visit an authorized Kia deal‐
er/service partner.
Press START button with smart key
(for smart key system)
• This warning message illuminates if
you press the Engine Start/Stop But‐
ton while the warning message Key
not detected is illuminating.
• At this time, the immobilizer indicator
light blinks.
Check fuse BRAKE SWITCH (for smart
key system and automatic transaxle /
dual clutch transmission)
• This warning message illuminates if
the brake switch fuse is disconnec‐
ted.
• It means that you should replace the
fuse with a new one. If that is not
possible, you can start the engine by
pressing the Engine Start/Stop But‐
ton for 10 seconds in the ACC posi‐
tion.
Shift to P or N to start engine (for
smart key system and automatic
transaxle / dual clutch transmission)
• This warning message illuminates if
you try to start the engine with the
shift lever not in the P (Park) or N
(Neutral) position.
4
4-77