Kia CERATO 2018 Owner's Manual page 43

To release the seat belt:
The seat belt is released by pressing
the release button (1) on the locking
buckle. When it is released, the belt
should automatically draw back into
the retractor.
If this does not happen, check the belt
to be sure it is not twisted, then try
again.
Lap belt (if equipped)
To fasten your seat belt:
To fasten a 2-point static type belt, in‐
sert the metal tab (1) into the locking
buckle (2). There will be an audible
"click" when the tab locks into the buck‐
le. Check to make sure the belt is prop‐
erly locked and the belt is not twisted.
3
3-23