Kia CERATO 2018 Owner's Manual page 55

If you need to tighten the belt, pull the
webbing toward the retractor. When
you unbuckle the seat belt and allow it
to retract, the retractor will automati‐
cally revert back to its normal seated
passenger emergency locking usage
condition.
Installing a child restraint system
with a lap belt (on the center rear
seat) (if equipped) - Except Europe
To install a child restraint system on
the center rear seats, do the following:
1. Place the child restraint system on
the center rear seat.
2. Extend the latch plate tongue of
the lap belt.
3. Route the lap belt through the re‐
straint according to the restraint
manufacturer s instructions.
4. Buckle the seat belt and adjust the
lap belt for a snug hold on the child
restraint by pulling on the loose
end of the belt. After installation of
the child restraint system, try to
move it in all directions to be sure
the child restraint system is se‐
curely installed.
3
3-35