Introduction - Baxi Luna 3 Comfort Series Installation And Servicing Instructions

The luna 3 310 Fi - 1.310 Fi boilers are wall hung, fan assisted room-sealed boilers. Heat output is controlled by a modu-
lating gas valve.
The boilers, providing both central heating and domestic hot water at mains pressure, is designed for use with a fully
pumped, sealed and pressurised heating system.
The boilers are supplied with a pump, diverter valve, pressure relief valve, expansion vessel and pressure gauge fully
assembled and tested.
As supplied, the boilers will automatically modulate to provide central heating outputs between 10.4 and 31.0 kW (35 486
and 105 776 Btu/h).
The maximum output available for domestic hot water is 31.0 kW (105 776 Btu/h), capable of providing 2.8 gal/min. - 12.7
litres/min with a temperature rise of 63°F/35 °C.
IMportant
It is the law that all gas appliances are installed by a competent person.
It is in your own interest and that of safety to ensure that the law is complied with.
• The installation must conform to the requirements of the authority having jurisdiction or, in the absence of such requi-
rements, to the National Fuel Gas Code, ANSI Z223.1/NFPA 54
Where required by the authority having jurisdiction, the installation must conform to the Standard for Controls and
Safety Devices for Automatically Fired Boilers, ANSI/ASME CSD-1.*
Safe lighting and other performance criteria were met with the gas manifold and control assembly provided on boiler
when boiler underwent tests specified in ANSI Z21.13-latest edition.
• The installation should conform with CGA B149.1 INSTALLATION CODE and/or local installation Code, plumbing or
waste water codes and other codes as applicable.
• Clearances from and protection of combustible material.
• Manufacturer's instructions must NOT be taken in anyway as over-riding statutory obligations.
InstructIons pertaInInG to tHe Installer

1. introduction

3
95.188.3 - GB