Bushnell Elite 1 Mile ARC CONX Manual page 12

TIP: While pressing the POWER button, you can move the device slowly from object to object and intentionally force
the laser to hit multiple objects to ensure that you are only displaying the furthest of the objects recognized by the laser.
Once the device has shut off, the unit will always default back to the last targeting mode used.
MENU SETUP – SELECTION OF DISPLAY BRIGHTNESS, RIFLE, REGULAR MODES, UNIT OF MEASURE, SIGHT-IN DISTANCE AND BALLISTIC
CORRECTION
DISPLAY BRIGHTNESS
Vivid Display Technology™ dramatically improves contrast, clarity and light transmission while increasing brightness
of the digital readout, making distance readings legible in low light environments.
There are four intensity settings to choose from and this is the first setting within the SETUP menu. Press the MODE
1, 2,
button for 3 seconds to get into the SETUP menu. The existing brightness setting will be flashing (i.e.
3, or 1" is the lowest
), pressing the MODE button will toggle between the four brightness settings. "
intensity while " " is the brightest.
Simply press the MODE button until the desired brightness setting is displayed and select by pressing and releasing
the POWER button.
There are two ARC (Angle Range Compensation) modes and one REGULAR mode. The two ARC modes are RIFLE
HD mode and RIFLE mode.
To select between these modes, first turn the unit "ON" by pressing and releasing the POWER button. Next, press
12