Bushnell Elite 1 Mile ARC CONX Manual page 10

ACTIVE LASER
Crosshairs surrounding the aiming circle indicate that the laser is being transmitted. Once a range has been acquired,
you can release the power button. The crosshairs surrounding the circle will disappear once the power button has been
released (i.e. the laser is no longer being transmitted).
SELECTIVE TARGETING™ MODES
The Elite 1 Mile ARC was especially designed with hunters in mind. The selective targeting modes allow you to
™ ™
adjust the performance parameters of the unit to suit your specific situation and environment. To move from one
mode to another, press the POWER button once to turn on the unit. While looking through the eyepiece, press the
MODE button and quickly release. The different targeting modes available and mode indicators are listed below:
Standard with Automatic SCAN (LCD Indicator – none) This setting allows most targets to be distanced up to 1760
yards. Used for moderately reflective targets that are typical of most distancing situations. The minimum distance in
the standard mode is 10 yards. To use the Automatic SCAN feature, simply hold down on the POWER button for
approximately 3 seconds and move the rangefinder from object to object while leaving the POWER button depressed.
Automatic SCAN will allow the range to be continuously updated as multiple objects are
targeted.
BullsEye ™ (LCD Indicator - ) This advanced mode allows easy acquisition of small targets
and game without inadvertently getting distances to background targets that have stronger
signal strength. When more than one object has been acquired, distance of the closer object
218
will be displayed and a crosshair will surround the BullsEye™ indicator informing the user that
distance to the closer object is being displayed in the LCD.
Fig.1
10