Uniden AS1052 Series User Manual page 3

4. Use the base AC adapter to connect the power jack on the base to a
standard AC power outlet. If you have accessory handsets, connect
each repeater (or charger) in the same way.
5. Place a handset in the base with the display facing forward.
For two or more handsets, place each handset in a repeater (or
charger).
Charge all handsets completely (about 15 hours) before using
them.
Connect the Telephone Cord
Use the telephone cord to connect the
telephone wall jack.
Welcome Mode
After the first battery charging, the phone becomes "Welcome Mode"
and you need to set up the phone according to the region of use.
Follow the steps below:
1. WELCOME appears on the display. Press
setting.
2. Use UP or DOWN
and press
MENU/OK
3. Press MENU/OK again to confirm. To go back, press
4. Use or
UP DOWN
use, and press
MENU/OK
5. Using the number keypad, enter the date and press
enter the time and press
Test the Connecti on
1. Pick up the handset from the cradle and press
should hear a dial tone, and the display shows CALLING.
If you don't hear a dial tone, try checking the connection between
the base and the phone jack.
2. Make a quick test call. (Press
If you keep hearing a dial tone, try changing to pulse dialing (see
page 13).
3. Test any handsets in the same way. If you cannot connect the test
call, try registering the handset to the base (see page 28).
to switch the display to the region that you live in,
.
to switch the display to the language you want to
.
.
MENU/OK
to hang up.)
END
jack to a standard
TEL LINE
MENU/OK to start the
CANCEL
MENU/OK
TALK/FLASH
.
. Then
. You
3