Uniden AS1052 Series User Manual page 13

Menu Option What it does
The handset and base will return to the factory default
settings. When the phone prompts to confirm, press
RESET MENU/OK
page 3 to continue to set up. To use this feature, turn
on the power of all handsets and place near the base.
The LINE SETTINGS
The settings on this menu affect all handsets and the base. Only one
handset at a time can change these settings. Before changing these
settings, make sure no handset is on a call and all handsets are within
range of the base.
Menu Option What it does
You can change the country setting from the one
chosen during the Welcome Mode. The phone
settings are automatically adjusted for the selected
COUNTRY country. When the phone prompts to confirm, press
MENU/OK
handsets. To use this feature, turn on the power of all
handsets and place near the base.
Recall time is the time delay by which the line will be
RECALL TIME disconnected after you press
It can be set to SHORT, MEDIUM, or LONG.
If you have subscribed to Caller ID, your phone may
FIRST RING start to ring before the Caller ID displays on the
screen. To prevent it, set this option to OFF.
Choose tone or pulse dialing. If you use pulse dialing
and you need to send DTMF tones during a call, press
DIAL MODE and hold
When the call ends, the phone automatically returns
to pulse dialing mode.
The REGISTRATION
This menu lets you register the handset to a base or de-register the
handset from the base (see page 28).
. The phone becomes Welcome Mode. See
Menu
. Then you need to set the language for all
* to temporarily switch to tone dialing.
Menu
during a call.
TALK/FLASH
13