Uniden AS1052 Series User Manual page 27

Audio problems
There's a lot of noise
or static on the line.
Callers sound weak or
soft.
Answering machine
problems
The answering machine
does not work.
The answering machine
won't record messages.
A handset can't
access the answering
machine.
Repeater problems
I can't get my handset
to switch to the
Repeater.
The LINK light on the
Repeater randomly
starts blinking.
Possible solutions
Check for interference from appliances
(TVs, computers, microwave ovens, etc.)
or wireless devices (headphones, room
monitors, controllers, WiFi equipment,
etc.). Move the handset or base away from
the interference source.
If you have any service that uses the phone
line, add a DSL or telephone line filter.
Move the handset closer to the base.
Keep the handset's battery fully charged.
Increase the earpiece volume.
Possible solutions
Make sure the answering machine is on.
Make sure the base is plugged in.
Make sure the ANSWER MODE
ANSWER & REC.
Deleting messages (memory may be full).
See if another handset is using the
machine.
Make sure the phone is in standby.
Possible solutions
Re-register the repeater to the base.
Make sure the repeater and handset are
registered to the same base.
Move the repeater closer to the base.
is set to
27